GREEN-LABEL stop-off coating against carburizing – water-based
Highly effective stop-off protection for use with vacuum or gas carburizing: temperatures up to 1900°F and depth up to 0,125" depending on the coating thickness. Applied by painting, dipping and spraying (airless system).
To clean parts after carburizing simply wash them with soap and water. The tools can be cleaned the same way. Removal of the product is ecologically safe.
EXTENT OF SUPPLY:
| 11 lbs |
Plastic bucked 3,8 l |
| 571 lbs |
Barrels 209 l |
BLUE LABEL stop-off coating against nitriding – water-based
Highly effective protection against nitriding by one or more applications depending on the requirements. The product should not be heated above 400°F without a protective gas atmosphere. After nitriding, the residue may be removed with a cloth or stiff brush. Clean up tools with soap and warm water.
EXTENT OF SUPPLY:
Both products are ecologically safe.
Tools can be cleaned with soap and warm
water and hazardous waste removal is
unnecessary.
|
Green-Label 
